Swapping a GMC Truck Grille onto a Chevy (OBS 1994-1998)

Installing a 1994-1998 GMC truck grille onto a Chevy truck (and vice versa) involves a few steps. Let’s break it down:

1. Grille Removal:
   • Chevy Truck (Silverado):
     • Remove the seven millimeter screws holding the grille to the hood.
     • Unplug and remove the lower lights (corner lights).
     • Locate and remove the secret screw above the emblem.
     • Pull up on the three clips securing the grille to the bumper filler panel and remove the grille.
     • Remove the five screws holding the bumper filler panel and take it off.
   • GMC Truck (K1500):
     • Follow similar steps as for the Chevy truck to remove the grille.
2. New Grille Installation:
   • Attach the valance, reflector, and marker light to the new grille.
   • Line up the grille and push it into place.
   • Reinsert the bolts and secure the grille.
3. Parts Consideration:
   • While the grille itself should fit, consider the following:
     • Corner Lights: These do not swap between Trucks, but the headlights and parking lights do.
     • Bumper Filler Strip: 1994-98 is the same for both CHEVY and GMC, but if you have a 1988-1993 you will need a new 1994+ one.